Feeling Gifty -Cricut Circle Weekly Challenge #43

Feeling Gifty -Cricut Circle Weekly Challenge #43

This week’s challenge was perfect since I needed to complete the purse gift set previously posted.

October 27

The Challenge: We all love to receive a little surprise . . . just because! This challenge is all about paying it forward and brightening someone’s day! Create something to give away using your Cricut machine. It can be for a holiday, a season, an occasion, or just because. Be sure to include at least 2 Cricut Image Cuts on your project.


To accompany the purse, I added a matching gift card holder from the Cindy Loo cartridge.  A monogram was used to match the purse, and rhinestones were added for some extra bling.


The cupcake was more for nostalgia than anything.  I used to bake and decorate cakes before I became ill, a task that is too much for me at this time.  Since I could not bake her favorite carrot cake, I decided a sock cupcake would do the trick.


The sock cupcake is not an original idea, but I also cannot give credit to any one particular person, as they can be found on countless websites and done in as many ways.  For mine, I cut the butterfly 2 from the Cupcake Wrappers cartridge at 2-1/2×11-1/2 using the same papers as the gift card and purse.  A think layer of glitter was added to the top edge of the cupcake holder.  I then added some vintage lace and some black hand dyed ribbon; glitter was added to the black ribbon to give it a little sparkle of it’s own.  I wrapped 3 sheets of tulle around the sock and rotated them to create a tissue paper look.  To make the candle, I simply rolled a strip of leftover paper and cut a flame from a yellow piece of cardstock.  The flame was then inked around the edges and glued into the candle base.

Since my friend is a dark chocoholic, I also added some Godiva dark chocolates to the purse. When she received the gifts, she was thrilled and intends to keep them on her desk at work.  She also plans to keep chocolates in her purse all the time to share, as well as show off her gifts.  Nice to know when you’ve created a gift that keeps on giving!

Monochromatic Challenge – Cricut Circle BLOGiversary

Monochromatic Challenge – Cricut Circle BLOGiversary

This was the toughest challenge for me personally, which is why it is my final entry for the BLOGiversary challenge.  I couldn’t decide what to do, what colors to use, and so on.  A dear friend of mine is turning 70 next week, and I wanted to do something for her, so I did finally decide I would make her the purse from the Wild Card cartridge.  I was excited about this since this would be my first experience with making this item.

October 13

The biggest problem came when I was trying to choose a color.  Her favorite color is red, but I couldn’t find enough red papers that actually blended well to give the look I was hoping to create.  After several tries of other colors, I finally found what I was looking for in shades of black.  Although not my favorite color, I do love the elegance of black, so it made a good choice.

Once I started the project, it flowed quite well and was fun to make.  I used Bazzill Basics in black for the base of the purse, then cut an additional top and back piece out of Creative Memories Delight Fashion Diva paper.  I went back to my mother’s stash of vintage buttons and found the perfect one with lots of bling factor for the clasp of the purse, then added rhinestones to the edge.

The decorative monogram area was created using the Close to My Heart Art Philosophy cartridge. The pieces were sprayed with Tattered Angels Snow Queen, and the frame was given a light edging of glitter. The monogram “L” is from the Walls, D’cor and More cartridge and I used glitter to give it a punch.

The specifics of the project challenge:

The Challenge: Create a project of your choice using a monochromatic color scheme. Your project must include at least 2 different Cricut Image Cuts.


I learned a great deal making this purse, and if I were gong to do it again, I’d make a few changes.  First, I’d stitch the decorative paper to the base of the purse to give it a more realistic look, and I’d do the same with the label on the front.  Also, if I were going to do it again in black, I’d use black rhinestones; the crystal one’s get lost in the design.

I know my friend will love it, and I cannot wait to give it to her filled with some birthday goodies.  Now, all I have to do is decide what types of goodies to include.

Recipe Challenge – Cricut Circle BLOGiversary

Recipe Challenge – Cricut Circle BLOGiversary

Sometimes I have to search for the right paper for a project; others it seems the paper dictates the project.  When I opened the package of Basic Gray Jovial Collection Pack, I knew exactly what I was going to do with it, and it was perfect for this challenge.

The Challenge: Use your Cricut machines to create a project using the following  “recipe”.  It must contain 1) A Title; 2) At least 2 Cricut Cuts, and 3) At least 3 buttons.

October 12

The papers in this pack reminded me of Grandmother Taylor-Haas and her handmade Christmas decorations, from the numerous ceramics she made in her 40 years in business, to the adorable sewed projects I still use to decorate my home during the holidays.  She was so incredibly artistically talented: sewing (she was a master seamstress), knitting, crocheting, embroidery work, ceramics, painting, and many I’m sure I’ve forgotten at the moment.

I wanted to create a holiday project with a very vintage feel, and the ornaments remind me of the one’s my family still hang on the tree every year.  I used the ornaments from the Christmas Cheer cartridge and letters from the Wall D’cor and More cartridge.


I placed a gold ribbon vertically over the background paper so that the ornaments would sit on it to match the background.  Each ornament was inked, sprayed with Ranger’s Glimmer Mist, and embellished with rhinestones and pearls.  The letters were sprinkled with white glitter.  The buttons, located in the upper left corner and lower right corner, are some more newly acquired buttons from my mother’s vintage collection.

So, this one is for Grandmother, who brought so much joy to so many lives in her 90 years.

Exclusive Cricut Circle Cartridge Challenge – Cricut Circle BLOGiversary

Exclusive Cricut Circle Cartridge Challenge – Cricut Circle BLOGiversary

Continuing with the Cricut Circle BLOGivesary week challenges, today’s project was one of the harder one’s for me to choose.  While I have enjoyed all the exclusive cartridges available to Circlets, by far my favorite is the Sophie cartridge as I find it creates such elegant cards.  However,

October 11

I wanted to maintain my fall theme, but I never liked the pumpkin shape on this cartridge.  I decided that perhaps I’d appreciate it more if I actually worked with it and tried it rather than just judging it.  Having done so, I find that I am rather fond of the little elegant pumpkin after all.  So much for prejudging!

The Challenge: Create a project of your choice with one or more of the Cricut Circle Exclusive cartridges! (French Manor, Shall We Dance, Cricut Everyday, Pop-Up Neighborhood, or Sophie) Your project must include at least 2 different Cricut Image Cuts. And YES! You can mix in other cartridges with your Circle Exclusive cartridges.

I did have another one of those creative opportunities I’m so fond of talking about; after completing the card, I dropped an ink pad right into the middle of one of the sections of the pumpkin.  So, I decided I was supposed to add glitter, so now it does.  I am so glad I have these crafting disasters!

10-10-11-a-Cartridge Challenge
Cuttlebug Challenge – Cricut Circle BLOGiversary

Cuttlebug Challenge – Cricut Circle BLOGiversary

Cricut Circle BLOGiversary: Cuttlebug Challenge

October 10

Today’s project is another one from last week’s Cricut Circle BLOGiversary, which included the additional requirement of using the Cuttlebug machine (an embossing tool), together with the Cricut.  Using an embossing tool, such as the Cuttlebug, allows you to add dimension and texture to a cut.

The Challenge: Create a project of your choice using your Cuttlebug machine as the main focus. Your project must include at least 2 different Cricut Image Cuts.

This was a fun, albeit very time consuming, project for me.  Generally, I have an idea of what I want something to look like when it’s finished, and usually it works out well.  There are those times, though, when things just don’t turn out exactly as I had hoped.  Those are the “it looked better in my head” projects.  Thankfully, this is not one of those projects.


To create the wreath, I used the leaves from the Straight From the Nest cartridge (the 5 leaves are found under the Layer feature), cut approximately 225 leaves from 9 different types of paper (some printed with a design; some plain).  Once they were all cut, I sorted them into 5 stacks by type and assigned a Cuttlebug folder to each one, and all were embossed.

Once the leaves were embossed, I inked the edges of each leaf and lightly inked the embossed area to give it additional visual depth.  Then, all the leaves were spayed using Ranger’s Perfect Pearls Mists in Heirloom Gold.  While the leaves were still wet, I crumpled each leaf to give it additional texture and depth.


To make the wreath easier to work with, I covered the entire thing in paper prior to placing the leaves on it.  I worked in a clockwise direction and began placing leaves onto the wreath, trying to vary the leave size, shape and color.

Once the leaves were covering approximately half the wreath, I wrapped the ribbon around it to ensure sufficient space for the placing of the letters and then completed the process of adding leaves.  Four leaves were used as background for the letters to spell out “Fall”.


I did not use all of the leaves on the wreath; approximately 40 were left.  I had purchased 3 candles for the mantle over the fireplace, so I embellished them with some of the remaining leaves.  I had intended to do this when I purchased them, so it worked out well.  Two of the candles had embellishments when purchased, so I incorporated those along with my leaves.  I also created a few acorns, which I ended up not using on the wreath, so they were added to one of the candles.


I am very pleased with the way the project turned out, and it is definitely better than I imagined it!


Sketch Challenge – Cricut Circle BLOGiversary

Sketch Challenge – Cricut Circle BLOGiversary

Cricut Circle BLOGiversary: Sketch Challenge

Recently, as I was checking out my favorite blog sites, I came across a note by someone that described how she kept up with all of her ongoing projects.  I remember thinking to myself, “Projects”??? I can only manage one project at a time.  And, then, the inevitable happened: “I’d never do that!”

October 9

Bright and early Monday morning, I was eating my own thoughts.  The Cricut Circle Blog was one year old, and they are celebrating their BLOGiversary by having a different challenge every day of the (past) week.  Well, I’m sure you can imagine what happened next; yes, I have a table full of drawings, supplies for specific projects, cartridge booklets marked and/or opened to certain designs, partially completed projects and a numeric list of which one’s I want to complete first.

Today, I am rolling out the first of the 4 projects I completed for the BLOGiversary challenges: the Sketch Challenge.

The Challenge: Create a project of your choice using the sketch below. Your project must include at least 2 different Cricut Image Cuts.



The prize for this challenge is a new Cricut Imagine; prizes are selected by a random drawing.  Here’s my entry into this challenge:


In order to create this card, I used the following Cricut cartridges:  Happy Hauntings, October 31st and Cindy Loo.

I’ve still much to do to complete and post the remaining challenges, so time to head back to the Cricut and get to work.

Never say, “Never!”